Summer can be blistering hot and frustrating if you do not own an air conditioning unit. This is why most homeowners invest in HVAC units just before summer sets in. Most people will agree that these pieces of machinery are easily one of the best inventions to have graced mankind. No matter how hot it is, or which part of the world you are in, an HVAC system in your home will cool it down like magic. Once you have decided to invest in an air conditioning unit, you will also have to find a reputed company that deals with air conditioning installation in El Dorado Hills, like South Placer Heating and Air.
For those installing smaller window air conditioning within their home or property, here are some DIY tips for your project from our South Placer team.
Window A/C Installation Steps
While we always recommend to call our Placer Heating and Air professionals for A/C installation, today we present to you some simple DIY window air conditioning installation techniques that will help you wrap up your El Dorado Hills A/C project in no time. Like with any other DIY project, you need to have the necessary tools to do an air conditioning installation in El Dorado Hills.
Tools you need:
- A caulking gun
- Some waterproof caulk
- A measuring tape
- A pencil if you do not have one at home
- Mounting hardware
The screws are generally packed with the air conditioning unit along with the manufacturer’s foam insulation.
The next step is to measure the area you intend to cool. This will help you calculate the size of the AC unit that you will need to buy and install. Buying a unit that is too small may be a waste of money as it will not be capable of cooling the entire area.
Once, you have bought yourself the right air conditioning unit, your next step entails determining where you wish to install the unit. Measure your window opening and ensure that the unit you have purchased, properly fits into the opening. Install the mounting brackets that came with your unit by carefully following the manufacturer’s guidelines and directions.
Another way that you can perform an air conditioning installation in El Dorado Hills is by sliding it into the window opening and hooking it up the mounting brackets. Once this is done, it gets really simple. All you have to do is to lower the window right onto the top of your unit and slowly pull out the extensions on either side of the system before you attach the wiring to the window frame. Be sure to use foam to seal the gap between the top of your AC unit and the window frame. The last step is to attach your drainage hose to the unit fitted outside that helps keep the warm air out. Once you have completed this step, you have to caulk around the outside. The last step is to plug your unit and test it! And, of course, enjoy all that cool air that gushes in!
Let South Placer Help
Contact South Placer Heating and Air for expert tips, or for more information regarding the installation of your AC unit.